深圳漢高樂泰銷售處，昆山樂泰，東莞樂泰，上海漢高樂泰銷售。致電陳生 137、5113、6332.Q.Q/30/22/24/564/   供應正品樂泰190024LV  美國樂泰190024LV  樂泰190024S 

LOCTITE 190024LV can be cured by exposure to UV and/or visible light of

sufficient intensity. Surface cure is enhanced by exposure to UV light

in the 220 to 260 nm range. Cure rate and ultimate depth of cure

depend on light intensity, spectral distribution of light source,

exposure time and light transmittance of the substrate through which

the light must pass.

Fixture Time

UV fixture time is defined as the light exposure time required to

develop a shear strength of 0.1 N/mm2.

UV Fixture Time , Glass microscope slides, seconds:

6 mW/cm2, measured @ 365 nm <10

TYPICAL PROPERTIES OF CURED MATERIAL

Sample cured 30 mW/cm2 @ 365 nm for 30 seconds (Typical Cure

Recommendation)